ব্যবহারকারী:Saifee79/জৈবচুল্লি
থাম্ব|301x301পিক্সেল|গাঁজন এবং কোষ কালচারের জন্য ব্যবহৃত অটোক্লেভেবল বেঞ্চ-টপ গবেষণাগার জৈবচুল্লি A bioreactor may refer to any manufactured or engineered device or system that supports a biologically active environment.[১] In one case, a bioreactor is a vessel in which a chemical process is carried out which involves organisms or biochemically active substances derived from such organisms. This process can either be aerobic or anaerobic. These bioreactors are commonly cylindrical, ranging in size from litres to cubic metres, and are often made of stainless steel.
জৈবচুল্লির নকশা সম্পাদনা
জৈবচুল্লির ধরণসমূহ সম্পাদনা
আলোক-জৈবচুল্লি সম্পাদনা
ব্যক্তিগত জৈবচুল্লি সম্পাদনা
থাম্ব|অ-পেশাদারদের জন্য ব্যক্তিগত জৈবচুল্লি
স্যুয়েজ ব্যবস্থাপনা সম্পাদনা
উপর এবং নিচে আলোড়নকারী জৈবচুল্লি সম্পাদনা
নাসা টিস্যু ক্লোনিং জৈবচুল্লি সম্পাদনা
জৈবচুল্লির মডেলিং সম্পাদনা
জৈব-প্রক্রিয়ার বিভিন্ন ধাপ সম্পাদনা
জৈবচুল্লির বিভিন্ন অংশসমূহ সম্পাদনা
একটি আদর্শ জৈবচুল্লি নিচের অংশগুলি দ্বারা গঠিতঃ
আলোড়ক – used for the mixing of the contents of the reactor which keeps the “cells” in the perfect homogenous condition for better transport of nutrients and oxygen to the desired product(s).
ব্যাফল – used to break the vortex formation in the vessel, which is usually highly undesirable as it changes the center of gravity of the system and consumes additional power.
স্পার্জার – In aerobic cultivation process, the purpose of the sparger is to supply adequate oxygen to the growing cells.
জ্যাকেট – The jacket provides the annular area for circulation of constant temperature of water which keeps the temperature of the bioreactor at a constant value.[২]
জৈবচুল্লির জন্য মডেলিং সমীকরণসমূহের সম্প্রসারণ সম্পাদনা
পূর্ণাঙ্গ অবিছিন্নতা সমীকরণ সম্পাদনা
d(ρV)/dt = Fρ – Fρ = 0 (1)
বায়োম্যাস অবিছিন্নতা সমীকরণ সম্পাদনা
d(Vx)/dt = Fxi – Fx + Vr1 (2)
dx/dt = (F/V)xi – (F/V)x + r1 (3)
dx/dt = Drxi – Drx + r1 (4)
dx/dt = Dr(xi – x) + r1 (5)
সাবস্ট্রেট অবিছিন্নতা সমীকরণ সম্পাদনা
d(VS)/dt = FSi – FS – Vr2 (6)
dS/dt = Dr(Si –S ) – r2 (7)
জৈবরাসায়নিক বিক্রিয়া গতিবিদ্যা সম্পাদনা
A ----> P
( –rA) = k (CA)n (8)
(rA) = – k (CA)n (9)
r1 = μx (10)
Y = r1/ r2
r2 = r1/Y
r2 = μx/Y ( 10 থেকে) (13)
মডেলিং সমীকরণের শেষ ধাপ সম্পাদনা
dx/dt = Dr(xi – x) + μx (14)
dS/dt = S(Si – S) – (μx/Y) (15)
dx/dt = (μ – Dr)x (16)
dS/dt = S(Si – S) – (μx/Y) (15 থেকে)
আরও দেখুন সম্পাদনা
তথ্যসূত্র সম্পাদনা
আরও পড়ুন সম্পাদনা
- Pauline M Doran, Bio-process Engineering Principles, Elsevier, 2nd ed., 2013 আইএসবিএন ৯৭৮-০-১২-২২০৮৫১-৫
বহিঃসংযোগ সম্পাদনা
[[বিষয়শ্রেণী:জৈবপ্রযুক্তি]]