ফ্লুরোসেন্ট বাতি: সংশোধিত সংস্করণের মধ্যে পার্থক্য

বিষয়বস্তু বিয়োগ হয়েছে বিষয়বস্তু যোগ হয়েছে
Addbot (আলোচনা | অবদান)
বট: আন্তঃউইকি সংযোগ সরিয়ে নেওয়া হয়েছে, যা এখন উইকিউপাত্ত ...
NahidSultanBot (আলোচনা | অবদান)
বট নিবন্ধ পরিষ্কার করেছে, কোন সমস্যা?
৪ নং লাইন:
[[চিত্র:Tanninglampend.jpg|thumb|একটি দ্বি-পিন ফ্লুরোসেন্ট বাতির অভ্যন্তর]]
 
'''ফ্লুরোসেন্ট বাতি''', '''টিউব লাইট''', বা '''রড লাইট''' এক প্রকার [[বিদ্যুৎ|বৈদ্যুতিক বাতি]] যা [[আলো]] উৎপন্ন করার জন্য বিদ্যুৎ ব্যবহার করে [[পারদ|পারদের]] বাষ্পকে উত্তেজিত করে। এই বাতি প্রধানত আলোর এক ধরনের কৃত্রিম উৎস হিসেবে ব্যবহৃত হয়। ফ্লুরোসেন্ট বাতির ভেতরে থাকা পারদের বাষ্পকে বিদ্যুৎ ব্যবহার করে উত্তেজিত করা হলে পারদের [[অণু]]গুলো স্বল্প তরঙ্গদৈর্ঘ্যের [[অতিবেগুনি রশ্মি|অতিবেগুনি]] আলো উৎপন্ন করে যা [[প্রতিপ্রভা|প্রতিপ্রভ কণা]]কে আঘাত করে [[দৃশ্যমান আলো]] উৎপন্ন করে।
 
বাতির ভেতরে বৈদ্যুতিক শক্তি প্রবাহ নিয়ন্ত্রণ করার জন্য ফ্লুরোসেন্ট বাতিতে সবসময় একটি ব্যালাস্ট প্রয়োজন হয়, যা ইনক্যাডিসেন্ট বাতিতে প্রয়োজন হয় না। কিন্তু ফ্লুরোসেন্ট বাতি বৈদ্যুতিক শক্তি ব্যবহারের ক্ষেত্রে ইনক্যাডিসেন্ট বাতির চেয়ে অনেক বেশী উপযোগি। যদিও ফ্লুরোসেন্ট বাতির মূল্য সাধারণত বেশী, কিন্তু এটি কম বিদ্যুৎ শক্তি খরচ করে বলে আদতে এটি বেশ সাশ্রয়ী। বড় আকারের ফ্লুরোসেন্ট বাতি বাণিজ্যিক ভবনে এবং শিক্ষায়তনে ব্যবহৃত হলেও ছোট আকারের কম্প্যাক্ট ফ্লুরোসেন্ট বাতি বাসা বাড়িতে ব্যবহার হচ্ছে। ইনক্যাডিসেন্ট বাতির চেয়ে ফ্লুরোসেন্ট বাতি কম শক্তি খরচ করে এবং বেশীদিন টেকে, কিন্তু এগুলো তুলনামূলকভাবে আকারে বড়, জটিল এবং এর প্রাথমিক খরচ বেশী।
৭১ নং লাইন:
| [[General Electric|General Electric's]] ''Power Groove'' tubes only
|}
 
 
[[চিত্র:Germicidal Lamp 2.jpg|thumb|right|upright|Close-up of the cathodes and anodes of a [[germicidal lamp]] (an essentially-similar design that uses no fluorescent phosphor, allowing the electrodes to be seen.)]]
[[চিত্র:Germicidal UV discharge tube glow.jpg|thumb|left|upright|The unfiltered ultraviolet glow of a [[germicidal lamp]] is produced by a low pressure mercury vapor discharge (identical to that in a fluorescent lamp) in an uncoated fused quartz envelope.]]
 
[[চিত্র:Fluorescent_LightFluorescent Light.svg|thumb|A ''preheat'' fluorescent lamp circuit using an automatic starting switch. A: Fluorescent Tube, B: Power (+220 Volts), C: Starter, D: Switch (Bi-metallic thermostat), E: Capacitor, F: Filaments, G: Ballast)]]
[[চিত্র:New GE Ballast.JPG|thumb|230 V ballast for 18–20 W]]
[[চিত্র:Starterp.jpg|thumb|A ''preheat'' fluorescent lamp "starter" (automatic starting switch)]]
৮৩ ⟶ ৮২ নং লাইন:
[[চিত্র:Thermionic filament.jpg|thumb|right|Closeup of the filament on a low pressure mercury gas discharge lamp showing white thermionic emission mix coating on the central portion of the coil. Typically made of a mixture of [[barium]], [[strontium]] and [[calcium]] oxides, the coating is sputtered away through normal use, often eventually resulting in lamp failure.]]
[[চিত্র:Flourescent light refracted.jpg|thumb|250px|Light from a fluorescent tube lamp diffracted by a CD shows the individual bands of color.]]
[[চিত্র:Kelvin_Temperature_ChartKelvin Temperature Chart.jpg|thumb|190px|The light spectrums of different grow lamps]]
[[চিত্র:Old USSR Ballast.JPG|thumb|Magnetic single-lamp ballasts have a low [[power factor]]]]
[[চিত্র:Fluorescentfixturebelow20806.JPG|thumb|The "beat effect" problem created when shooting photos or film under standard fluorescent lighting.]]